
Konica Minolta Magicolor 7400 Toner Cartridges and Parts
The following products are guaranteed to work in
the Konica Minolta Magicolor 7400 printer.
|
Questions about products for this printer? |







Cartridge Replacement for Konica Minolta Magicolor 7400
Replacing the konica minolta 7400 toner cartridges is a very important part of printing successfully. A bad installation can cause problems that go from bad printing quality to damaging the toner cartridges or other printer parts.
Here are some easy steps that you can use to remove the used toner cartridges and install the new ones without damaging your printer or your Konica Minolta Magicolor 7400 toner cartridges.
Before start replacing the toner cartridges keep in mind the following safety recommendations:
CAUTION:
- - Do not burn or throw used toner cartridges into open flames, as this may cause a fire
- - If toner gets onto your hands or clothing, wash it off immediately with cold water. Do not use warm water as this may set the toner permanently, and you may not be able to remove the toner stains
Removing the used Konica 7400 toner cartridge
1. Open the cover board
2. Take the used Magicolor 7400 toner cartridge out of the printer
Installing the new Konica Minolta Magicolor7400 toner cartridge
3. Take the new Konica 7400 toner cartridge out of the box and shake it firmly
4. Put the new cartridge into the printer
5. Close the cover board